LM2500 gas turbine modifications for biomass fuel operation
LM2500 gas turbine modifications for biomass fuel operation
复制标题
用于生物质燃料运行的 LM2500 燃气轮机改造
DOI：
10.1016/s0961-9534(98)00021-x
复制
发表时间：
1998
影响因子：
6
通讯作者：
C. E. Neilson
中科院分区：
文献类型：
--
作者：
C. E. Neilson
航改燃气轮机被选为使用生物质低 BTU 燃料的中型 30 MW 热电联产发电设施的核心。发电机和联合循环发电厂的规模与大多数独立电力供应商的气化和燃料材料供应兼容。巴西木材生物质示范项目第二阶段是定义使用低 BTU 燃料运行所需的燃气轮机改造的工具。之所以选择 LM2500，是因为自推出以来其工业服务时间已超过 1700 万小时，而且所需的修改也很少。蒸汽喷射和增强操作的经验让我们深入了解了低 BTU 操作所需的增加燃料流量的处理。本文将讨论 LM2500PH 配置燃气轮机使用低 BTU 燃料运行所需的各种修改。
An aeroderivative gas turbine was selected as the heart of a medium size 30 MW co-generation power facility utilizing biomass low BTU fuel. The size of the generator and combined cycle plant are compatible with gasification and fuel material supplies for most independent power suppliers. The Brazilian wood biomass demonstration project phase II was the vehicle to define the gas turbine modifications necessary to operate on low BTU fuel. The LM2500 was chosen because of its extended industrial service of over 17 million hours of operation since its introduction and because the modifications required were modest. Experience with steam injected and augmented operation provided insight into the handling of the increased fuel flow necessary for low BTU operation. This paper will discuss the various modifications required for the LM2500PH configuration gas turbine to operate on low BTU fuel.