AC Loss of a Multi-Layer per Phase Tri-Axial HTS Cable with Balanced Current Distribution
AC Loss of a Multi-Layer per Phase Tri-Axial HTS Cable with Balanced Current Distribution
复制标题
具有平衡电流分布的多层每相三轴高温超导电缆的交流损耗
DOI:
10.1007/s10948-010-0863-0
复制
发表时间:
2011
影响因子:
1.8
通讯作者:
T.Hamajima
中科院分区:
文献类型:
--
作者:
A.N.Ozcivan;M.Toda;N.Hu;K.Hoshino;T.Yagai;M.Tsuda;T.Hamajima
Recently, high-temperature superconductor (HTS) cables have been widely studied because of their compactness and high power capacity compared to conventional copper cables. In HTS cables, AC loss is an important issue since large losses reduce the efficiency of the power line.Among HTS cables, tri-axial cable is under intensive investigation recently, since it has a smaller amount of HTS tapes, small leakage fields and small heat loss in leak when compared with the three single-phase cables. For realizing high current capacity, more than one layer is required for each phase; therefore AC loss of the multi-layer tri-axial HTS cable should be carefully examined.In the tri-axial cable, different phase currents produce the out-of-phase magnetic fields on the other phase layers. In case of multi-layer arrangement, net magnetic fields on layer surfaces may exceed the penetration field of the HTS tape. Therefore in this paper, we analyze the AC loss of a tri-axial HTS cable which is composed of two layers per phase. Here, we treat the tri-axial cable which consists of two different longitudinal segments and thus satisfies balanced phase and homogeneous current distribution condition by controlling twist pitch and length of separate segments.