A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers
A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers
复制标题
DOI：
10.1063/1.2795337
复制
发表时间：
2007-10-01
影响因子：
4
通讯作者：
Tsai, Chen S.
中科院分区：
文献类型：
--
作者：
Shiraishi, Kazuo;Yoda, Hidehiko;Tsai, Chen S.
报道了一种用于单模光纤和光子硅线波导之间高效耦合的硅基光斑尺寸转换器（SSC）的理论和实验性能。SSC是由级联的水平线性和垂直非线性上锥体测量2.0毫米和86 μ m的长度，分别在绝缘体上硅基板。用小型SSC将直径为0.54 × 0.38 μ m（2）的Si线波导的细模场扩展到直径为5.1 × 9.2 μ m（2），在1.55 μ m波长处测得净传输损耗为0.5dB。(C)2007年，美国物理学会。
Theoretical and experimental performances of a robust Si-based spot-size converter (SSC) for efficient coupling between a single-mode fiber and a photonic Si-wire waveguide are reported. The SSC is comprised of cascaded horizontal linear and vertical nonlinear up tapers measured 2.0 mm and 86 mu m in length, respectively, in a silicon-on-insulator substrate. The fine modal field of a Si-wire waveguide, 0.54x0.38 mu m(2) in diameters, was expanded to diameters of 5.1x9.2 mu m(2) with measured net transmission loss of 0.5 dB at the wavelength of 1.55 mu m by the miniature SSC. (C) 2007 American Institute of Physics.