Research on yokeless double-sided multi-tooth flux-switching linear motor
Research on yokeless double-sided multi-tooth flux-switching linear motor
复制标题
DOI：
10.1108/compel-12-2015-0438
复制
发表时间：
2016-03
影响因子：
0.7
通讯作者：
Q. Lu;Huanwen Li;Xiaoyan Huang;Y. Ye
中科院分区：
文献类型：
--
作者：
Q. Lu;Huanwen Li;Xiaoyan Huang;Y. Ye
用途-由于直接驱动，高推力密度和高效率的优点，磁通开关直线电机（FSLM）在许多应用中都是必需的，包括航空航天和汽车。然而，由制动力引起的振动和大法向力产生的装配困难成为制约其发展的障碍。本文旨在探讨这些问题。设计/方法/方法-为了提高双面多齿FSLM （DMTFSLM）的电磁性能，提出了一种带移动主齿的无齿DMTFSLM，并与普通DMTFSLM进行了比较。通过理论分析，得出了槽极数组合的选择原则。基于有限元分析模型对6s/16p、6s/17p、6s/19p、6s/20p四种槽极组合的dmtfslm进行了分析。最后，对该无负载DMTFSLM的几个参数进行了优化，以获得更好的性能。研究结果-在无轭DMTFSLM中，发现…
Purpose – Due to the advantages of direct driven, high thrust density, and high efficiency, flux-switching linear motor (FSLM) is required for many applications, including aerospace and automotive. However, the vibration caused by detent force and difficulties in the assembly produced by the large normal force become the barriers that restrict its development. The paper aims to discuss these issues. Design/methodology/approach – In order to improve the electromagnetic performance of double-sided multi-tooth FSLM (DMTFSLM), a yokeless DMTFSLM with moving primary is proposed and compared with normal DMTFSLM. Moreover, with theoretical analysis, the selection principle of slot-pole number combination is obtained. DMTFSLMs with four slot/pole combinations, 6s/16p, 6s/17p, 6s/19p, 6s/20p, are analyzed based on finite element analysis model. Finally, several parameters of this yokeless DMTFSLM have been optimized to obtain the better performance. Findings – In yokeless DMTFSLM, it is found that the asymmetry of...