Development of a New Printing Method Using Soft Material Tools
Development of a New Printing Method Using Soft Material Tools
复制标题
使用软材料工具开发新的打印方法
DOI：
10.1007/978-3-030-75381-8_186
复制
发表时间：
2021
期刊：
影响因子：
--
通讯作者：
Masegi Yusuke
中科院分区：
文献类型：
--
作者：
Yoshikawa Yasuharu;Masegi Yusuke
开发了一种利用软材料工具对金属进行印刷的新方法。该方法使用激光打印机生产的具有精细图案的纸或塑料薄膜作为打印工具。铝盘在上下平模之间用软材料工具进行压缩。为了在金属表面上以均匀的图案进行高精度的印刷，研究了工艺条件对印刷的影响。利用软材料刀具进行的实验结果表明，平均压力和工件形状的组合改变了高精度的良好条件。这种新的印刷方法可以很容易地将图案印刷到金属工件上。从每个工件表面都可以观察到图案。在使用纸张时，由于打印的图案被纸张的表面粗糙度遮住，所以工件的表面轮廓不清晰。当使用PET薄膜时，可以清楚地观察到表面图案。需要平均压力才能清晰而均匀地打印图案。当减小工件的直径和厚度比D/T时，所需的平均压力就会降低。
A new printing method for metal using soft material tools has been developed. This method uses paper or plastic film with a fine pattern produced by the laser printer as a printing tool. The aluminum disc is compressed with a soft material tool between the upper and lower flat dies. In order to print with high accuracy with a uniformed pattern onto a metal surface, the effects of the process conditions on printing have been investigated. Experimental results using the soft material tools showed that the good condition for high accuracy was changed by the combination of the average pressure and the workpiece shape. The new printing method can print patterns easily onto the metal workpiece. The pattern can be observed from each workpiece surface. When using paper, the surface profiles of the workpiece are not clear because the printed pattern is hidden by the surface roughness of the paper. When using the PET film, the surface pattern can be clearly observed. The average pressure is needed to print the pattern clearly and uniformly. When decreasing the diameter and thickness ratioD/tof the workpiece, the required average pressure is decreased.