A potential candidate structural material for molten salt reactor: ODS nickel-based alloy
A potential candidate structural material for molten salt reactor: ODS nickel-based alloy
复制标题
熔盐堆潜在候选结构材料：ODS镍基合金
DOI：
10.1016/j.jmst.2021.08.071
复制
发表时间：
2022-05-20
影响因子：
10.9
通讯作者：
Huang，Hefei
中科院分区：
文献类型：
--
作者：
Li，Cheng;Lei，Guanhong;Huang，Hefei
The commercialisation of molten salts reactors (MSRs) is hindered by the lack of structural materials capable of withstanding the corrosive environment therein. To address this problem, we herein prepared 1 wt% Y2O3dispersion–strengthened NiMo-based alloys using powder metallurgy and evaluated their potential as structural materials for MSRs based on their mechanical properties, He swelling behaviour, and molten salt corrosion resistance. In view of the strengthening provided by homogenously dispersed Y2O3particles, all NiMo-Y2O3samples exhibited ultimate tensile strengths and yield strengths exceeding those of the Hastelloy N alloy, a state-of-the-art structural material for MSRs. Moreover, the volume fraction of He bubbles in the NiMo-Y2O3samples (∼0.3%) was lower than that in the Hastelloy N alloy (0.58%), which showed that the introduction of Y2O3nanoparticles effectively inhibited He swelling. All NiMo-Y2O3samples showed excellent resistance to molten salt corrosion (as reflected by the absence of obvious holes therein), thus holding great promise for the development of irradiation- and molten salt corrosion–resistant structural materials for high-temperature MSRs.
