Analysis of SOFCs Using Reference Electrodes
Analysis of SOFCs Using Reference Electrodes
复制标题
使用参比电极分析 SOFC
DOI：
10.1149/2.093309jes
复制
发表时间：
2013
影响因子：
3.9
通讯作者：
I. Celik
中科院分区：
文献类型：
--
作者：
H. Finklea;Xiaoke Chen;K. Gerdes;S. R. Pakalapati;I. Celik
Reference electrodes are frequently applied to isolate the performance of one electrode in a solid oxide fuel cell. However, reference electrode simulations raise doubt to veracity of data collected using reference electrodes. The simulations predict that the reported performance for the one electrode will frequently contain performance of both electrodes. Nonetheless, recent reports persistently treat data so collected as ideally isolated. This work confirms the predictions of the reference electrode simulations on two SOFC designs, and to provides a method of validating the data measured in the 3-electrode configuration. Validation is based on the assumption that a change in gas composition to one electrode does not affect the impedance of the other electrode at open circuit voltage. This assumption is supported by a full physics simulation of the SOFC. Three configurations of reference electrode and cell design are experimentally examined using various gas flows and two temperatures. Impedance data are subjected to deconvolution analysis and equivalent circuit fitting and approximate polarization resistances of the cathode and anode are determined. The results demonstrate that the utility of reference electrodes is limited and often wholly inappropriate. Reported impedances and single electrode polarization values must be scrutinized on this basis.
