Sci-Fri PM: Planning-01: Measured electron and x-ray angular distribution data for benchmarking Monte Carlo codes.
Sci-Fri PM: Planning-01: Measured electron and x-ray angular distribution data for benchmarking Monte Carlo codes.
复制标题
Sci-Fri PM：Planning-01：测量的电子和 X 射线角分布数据，用于对蒙特卡洛代码进行基准测试。
DOI：
10.1118/1.2965973
复制
发表时间：
2008
期刊：
影响因子：
3.8
通讯作者：
Faddegon,BA
中科院分区：
文献类型：
--
作者：
Cojocaru,CD;Ross,CK;McEwen,MR;McDonald,AF;Faddegon,BA
Monte Carlo (MC) studies of the output of medical linear accelerators have demonstrated that in‐air profiles are useful in the beam commissioning process. A recent investigation of x‐ray profiles (Tonkopiet al, Med. Phys32(9), 2005) showed very good agreement between measurement and EGSnrc calculations but to achieve this level of agreement the beam linac spot size, energy and angular divergence had to be treated as variables. In this project we carried out measurements and MC calculations for an electron accelerator for which the initial beam parameters are well known. Two sets of investigations were carried out. In the first we measured electron scatter distributions for a range of scattering foils and electron energies of 13 and 20 MeV. The profiles were parameterised and compared to EGSnrc Monte Carlo calculations. It was found that generally the EGSnrc calculations gave agreement with the measurements within 1.5 %. In the second investigation, which is on‐going, in‐air profiles were obtained for photon beams produced using different targets (from beryllium to lead). Measured angular distributions were obtained using ion chambers with different build‐up caps (low and high‐Z) and the sensitivity of the data to small changes in geometry (e.g., moving the x‐ray target) was investigated. The photon energy fluence was calculated using EGSnrc and preliminary indications are that the measured and calculated distributions agree to better than 5 %. Work supported in part by NIH grant R01 CA104777‐01A2.
