Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel
Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel
复制标题
双辊连铸高硅无取向电工钢组织、织构及磁性能表征
DOI：
10.1016/j.matchar.2013.11.014
复制
发表时间：
2014-02-01
影响因子：
4.7
通讯作者：
Wang, Guo-Dong
中科院分区：
文献类型：
--
作者：
Li, Hao-Ze;Liu, Hai-Tao;Wang, Guo-Dong
An Fe-6.5 wt.% Si-0.3 wt.% Al as-cast sheet was produced by twin-roll strip casting process, then treated with hot rolling, warm rolling and annealing. A detailed study of the microstructure and texture evolution at different processing stages was carried out by optical microscopy, X-ray diffraction and electron backscattered diffraction analysis. The initial as-cast strip showed strong columnar grains and pronounced < 001 >//ND texture. The hot rolled & warm rolled sheets were characterized by large amounts of shear bands distributed through the thickness together with strong < 110 >//RD texture and weak < 111 >//ND texture. After annealing, detrimental < 111 >//ND texture almost disappeared while beneficial {001}< 210 >, {001}< 010 >, {115}< 5 -10 1 > and {410} < 001 > recrystallization textures were formed, thus the magnetic induction of the annealed sheet was significantly improved. The recrystallization texture in the present study could be explained by preferred nucleation and grain growth mechanism. (C) 2013 Elsevier Inc. All rights reserved.
