White ACPEL Device with ZnS:Cu,Cl, Tb3Al5O12:Ce3+, and CaS:Eu2+ Phosphors Using a Layered Structure
White ACPEL Device with ZnS:Cu,Cl, Tb3Al5O12:Ce3+, and CaS:Eu2+ Phosphors Using a Layered Structure
复制标题
使用层状结构的 ZnS:Cu,Cl、Tb3Al5O12:Ce3 和 CaS:Eu2 荧光粉的白色 ACPEL 器件
DOI：
--
复制
发表时间：
2009
期刊：
影响因子：
--
通讯作者：
D. Jeon
中科院分区：
文献类型：
--
作者：
B. Park;G. Seo;J. T. Ahn;Dae Kon Oh;W. J. Chung;Ji Yeon Han;H. S. Jang;D. Jeon
采用层状结构的ZnS:Cu，Cl, Tb3Al5O12:Ce （TAG:Ce）和CaS:Eu荧光粉，尝试提高白色交流粉末电致发光（ACPEL）器件的显色指数（CRI）和亮度。使用TAG:Ce和ZnS:Cu，Cl荧光粉的器件显示出75的显色指数，根据TAG:Ce的厚度，亮度增加约30%。进一步的CRI改进尝试使用CaS:Eu。当它们单独丝网印刷时，显色指数增加到89，而亮度没有下降。
Improvement of the color rendering index (CRI) and luminance of a white alternate current powder electroluminescent (ACPEL) device has been attempted using ZnS:Cu,Cl, Tb3Al5O12:Ce (TAG:Ce), and CaS:Eu phosphors with a layered structure. The device with TAG:Ce and ZnS:Cu,Cl phosphors showed a CRI of 75, with a luminance increase of about 30% depending on the thickness of the TAG:Ce. Further CRI improvement was attempted using CaS:Eu. When they were separately screen‐printed, the CRI was increased up to 89 with no decrease in luminance.