Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten
Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten
复制标题
压痕尺寸和晶粒/亚晶粒尺寸对高纯钨显微硬度的影响
DOI：
10.1016/s1003-6326(15)63958-9
复制
发表时间：
2015-10-01
影响因子：
4.5
通讯作者：
Song, Min
中科院分区：
文献类型：
--
作者：
Liu, Guang-yu;Ni, Song;Song, Min
Hardness of materials depends significantly on the indentation size and grain/sub-grain size via microindentation and nanoindentation tests of high-purity tungsten with different structures. The grain boundary effect and indentation size effect were explored. The indentation hardness was fitted using the Nix-Gao model by considering the scaling factor. The results show that the scaling factor is barely correlated with the grain/sub-grain size. The interaction between the plastically deformed zone (PDZ) boundary and the grain/sub-grain boundary is believed to be the reason that leads to an increase of the measured hardness at the specific depths. Results also indicate that the area of the PDZ is barely correlated with the grain/sub-grain size, and the indentation hardness starts to stabilize once the PDZ expands to the dimension of an individual grain/sub-grain.
