Effect of Leakage Flow on Processing of Resinous Mixtures in the Pressure Zone of an Extruder
Effect of Leakage Flow on Processing of Resinous Mixtures in the Pressure Zone of an Extruder
复制标题
DOI：
10.1007/s10556-005-0083-9
复制
发表时间：
2005-06
影响因子：
0.3
通讯作者：
A. Tatarnikov;L. V. Burtelov;D. Gorbunov
中科院分区：
文献类型：
--
作者：
A. Tatarnikov;L. V. Burtelov;D. Gorbunov
注意到，当使用常用的数学模型来描述泄漏流对树脂混合物在挤出机通道中加工的影响时，得到的结果与实际情况不一致。考察了挤压机压力区的物料平衡，以及泄漏流对混合料加工的影响。在考虑泄漏流量的情况下，分析了处理过程。
It is noted that results disagreeing with reality are obtained when familiar mathematical models describing the effect of leakage flow on the processing of a resinous mixture in an extruder channel are used. The material balance in the pressure zone of the extruder, and the influence exerted by leakage flow on the processing of the mixture are examined.The processing regime is analyzed with allowance for leakage flow.