Fabrication of the shell-type Nb/sub 3/Sn dipole magnet at Fermilab
Fabrication of the shell-type Nb/sub 3/Sn dipole magnet at Fermilab
复制标题
费米实验室壳型 Nb/sub 3/Sn 偶极磁体的制造
DOI：
10.1109/77.920285
复制
发表时间：
2001
影响因子：
1.8
通讯作者：
A. Zlobin
中科院分区：
文献类型：
--
作者：
D. Chichili;G. Ambrosio;N. Andreev;E. Barzi;S. Caspi;V. Kashikhin;P. Limon;R. Scanlan;I. Terechkine;J. Tompkins;M. Wake;S. Yadav;R. Yamada;V. Yarba;A. Zlobin
在费米实验室制造了一个孔径为43.5 mm，标称磁场为11t的偶极磁体。本设计以卢瑟福型Nb/sub /Sn电缆为材料，采用风反应技术制成双层壳型线圈结构。机械支撑结构由两个铝夹锁紧的垂直分体式铁轭和8mm厚的不锈钢外皮组成。本文总结了第一个偶极子模型的制作细节和2110 mm长的力学模型的测试结果。
A 43.5 mm aperture dipole magnet with a nominal field of 11 T is being fabricated at Fermilab. The design is based on a two-layer shell-type coil structure made of Rutherford-type Nb/sub 3/Sn cable with wind and react technology. The mechanical support structure consists of vertically split iron yoke locked by two aluminum clamps and a 8 mm thick stainless steel skin. This paper summarizes the fabrication details of the first dipole model and test results from a 2110 mm long mechanical model.