Tensile bond strength of 4-META/MMA-TBB resin to ground bovine enamel using a self-etching primer.
Tensile bond strength of 4-META/MMA-TBB resin to ground bovine enamel using a self-etching primer.
复制标题
使用自蚀刻底漆时 4-META/MMA-TBB 树脂与磨制牛牙釉质的拉伸粘合强度。
作者：
T. Hayakawa;T. Fukushima;K. Nemoto
本研究的目的是检查自蚀刻底漆将 4-META/MMA-TBB 树脂粘附到牛牙釉质上的有效性。在这项研究中，我们设计了一种原创的自蚀刻底漆，其中含有 4-MET、35 wt% HEMA 和氯化铁的水性混合物。抛光的牛釉质表面用自蚀刻底漆处理30秒。在 37℃ 的水中浸泡 1 天后，测量 4-META/MMA-TBB 树脂与牙釉质的拉伸粘合强度。含有 30 wt% 4-MET 和 35 wt% HEMA (4MET30) 的自酸蚀底漆比其他自酸蚀底漆具有显着更高的粘合强度，为 11.2+/-2.8 MPa。在4MET30底漆中添加氯化铁显着降低了拉伸粘合强度。 SEM观察显示4MET30处理对牙釉质没有产生明显的溶解。与磷酸蚀刻相比，含有30 wt% 4-MET和35 wt% HEMA的自蚀刻底漆在4-META/MMA-TBB树脂与牙釉质的粘附方面更加优越。
The purpose of this study was to examine the effectiveness of self-etching primer in adhering 4-META/MMA-TBB resin to bovine enamel. In this study, we designed an original self-etching primer which contained an aqueous mixture of 4-MET, 35 wt% HEMA, and ferric chloride. The polished bovine enamel surface was treated with self-etching primer for 30 seconds. Tensile bond strength of 4-META/MMA-TBB resin to enamel was measured after 1-day immersion in water at 37 degrees C. The self-etching primer containing 30 wt% 4-MET and 35 wt% HEMA (4MET30) gave a significantly higher bond strength of 11.2+/-2.8 MPa than other self-etching primers. The addition of ferric chloride into 4MET30 primer significantly decreased tensile bond strength. SEM observation revealed that 4MET30 treatment produced no distinct dissolution on enamel. When compared with phosphoric acid etching, the self-etching primer containing 30 wt% 4-MET and 35 wt% HEMA was more superior in adhering 4-META/MMA-TBB resin to enamel.
影响因子：
5
作者：
Pashley, DH;Tay, FR
通讯作者：
Tay, FR