Hydroforming simulation and experiment of clad T-shapes
Hydroforming simulation and experiment of clad T-shapes
复制标题
复合T型材内高压成形模拟与实验
DOI：
10.1007/s00170-015-7558-4
复制
发表时间：
2016-03
期刊：
影响因子：
--
通讯作者：
Hui Wang
中科院分区：
文献类型：
--
作者：
Xunzhong Guo;Zhongli Liu;Hui Wang
Numerical simulations of the hydroforming process of Ti/Al clad T-shapes were conducted by using finite element analysis software. These simulations were used to optimize process parameters such as internal pressure, feed distance, and friction coefficient. Subsequently, hydroforming experiments were conducted based on these simulations. The results indicated that Ti/Al clad tubes could be obtained in the practical hydroforming process under the following forming conditions: internal pressure of 110 MPa, feed distance of punches of 25 mm, and a friction coefficient of 0.1. This resulted in well-bonded micro-interface between titanium and aluminum that is free from any delamination. The protrusion height of Ti/Al clad T-shapes were 25.5 mm and had high thickness uniformity.
登录
查看更多内容
影响因子：
4.7
作者：
Shu Zhang;Shu Zhang;K. Nielsen;J. Danckert;Zhong-jin Wang
通讯作者：
Shu Zhang;Shu Zhang;K. Nielsen;J. Danckert;Zhong-jin Wang
DOI：
--
发表时间：
2012
期刊：
The Chinese Journal of Nonferrous Metals
影响因子：
--
作者：
Li Ming
通讯作者：
Li Ming
影响因子：
8.4
作者：
Alaswad, A.;Olabi, A. G.;Benyounis, K. Y.
通讯作者：
Benyounis, K. Y.
影响因子：
8.6
作者：
J. Yan;X. Zhu;B. Yang;G. P. Zhang
通讯作者：
J. Yan;X. Zhu;B. Yang;G. P. Zhang
影响因子：
6.3
作者：
J. P. Abrantes;C. Lima;G. Batalha
通讯作者：
J. P. Abrantes;C. Lima;G. Batalha