Test preparation and lifetime measurement of very thin carbon stripper foils made by a controlled DC arc-discharge method
Test preparation and lifetime measurement of very thin carbon stripper foils made by a controlled DC arc-discharge method
复制标题
通过受控直流电弧放电方法制造的极薄碳剥离箔的测试准备和寿命测量
DOI：
10.1016/s0168-9002(01)02090-3
复制
发表时间：
2002
影响因子：
1.4
通讯作者：
N. Hayashizaki
中科院分区：
文献类型：
--
作者：
I. Sugai;Y. Takeda;M. Oyaizu;H. Kawakami;Y. Hattori;K. Kawasaki;N. Hayashizaki
采用可控直流电弧放电（CDAD）方法制备了极薄的塑料支撑碳剥离箔（1.2±0.3μg/cm2）。用3.2MeV的Ne+离子测量了这些薄膜的寿命。这些箔记录的寿命最长约为蒸发-冷凝生产的商用箔的四倍，平均寿命为三倍。
We have prepared very thin plastic supported carbon stripper foils (1.2±0.3μg/cm2) using a controlled DC arc-discharge (CDAD) method. The lifetime of these foils was measured with 3.2MeV Ne+ions. These foils recorded lifetimes about four times longer at the maximum and three times longer on the average than those commercially available foils produced by evaporation–condensation.
为 RIBF 项目开发长寿命碳剥离箔
DOI：
--
发表时间：
--
期刊：
Proceedings of the 17th International Conference on CYCLOTRONS and Their Applications 2004 (in press)
影响因子：
--
作者：
I.Sugai;H.Hasebe;Y.Miyazawa
通讯作者：
Y.Miyazawa