Enhanced dynamic response of the in-plane switching liquid crystal display mode through polymer stabilization
Enhanced dynamic response of the in-plane switching liquid crystal display mode through polymer stabilization
复制标题
DOI：
10.1063/1.125319
复制
发表时间：
1999-11-22
影响因子：
4
通讯作者：
Zumer, S
中科院分区：
文献类型：
--
作者：
Escuti, MJ;Bowley, CC;Zumer, S
通过聚合物稳定，平面内切换向列相液晶模式的动态响应时间得到了显著改善，这种模式在平板显示器应用中很有用。这一改进是通过引入低密度、稳定的聚合物网络来实现的，该网络导致向列相导向器以牺牲传输和略高的驱动电压为代价倾向于零场取向。在弹性连续介质理论的一般框架下，我们提出了一个简单的模型，将聚合物网络视为一个有效场。(C)1999年美国物理研究所。[S0003-6951(99)02847-8]。
A significant improvement in the dynamic response time of the in-plane switching nematic liquid crystal mode, useful in flat-panel display applications, is achieved through polymer stabilization. This improvement is achieved by introducing a low-density, stabilizing polymer network that causes the nematic director to favor the zero-field orientation at the expense of transmission and slightly higher drive voltages. We present a simple model that treats the polymer network as an effective field in the general framework of elastic continuum theory. (C) 1999 American Institute of Physics. [S0003-6951(99)02847-8].