Magnetic Abrasive Finishing of Internal Surface of Aluminum Pipe Using Magnetic Machining Jig
Magnetic Abrasive Finishing of Internal Surface of Aluminum Pipe Using Magnetic Machining Jig
复制标题
利用磁力加工夹具对铝管内表面进行磁力研磨精加工
DOI：
10.4028/www.scientific.net/amr.894.222
复制
发表时间：
2014
期刊：
影响因子：
--
通讯作者：
Y. Zou
中科院分区：
文献类型：
--
作者：
Muhamad Mohd Ridha;Y. Zou
磁力研磨技术在不锈钢SUS304管材的镜面光整加工中已得到广泛应用。然而，由于软金属本身的特性，在较软金属如铝A2017中的应用是困难的。2002年，Zou和Shinmura开发了一种新的磁场辅助加工工艺方法，使用磁性加工夹具加工SUS304管材[。从那时起，这一发展在许多研究中得到了扩展。本研究找到了A2017铝管内表面达到镜面光洁度标准的最佳加工条件。我们使用100%聚酯织物，不会对材料造成划痕，并发现最佳极管间隙为13mm，以实现最佳表面粗糙度Ra为0.020 μ m，从表面粗糙度Ra为0.195 μ m的精加工前。
Magnetic abrasive finishing technology has been known very well in finishing of stainless steel SUS304 pipes to mirror finish standard. However, the applications in softer metal such as aluminum A2017 were difficult due to soft metal characteristic itself. In 2002, Zou and Shinmura had developed a new method of magnetic field assisted machining process using magnetic machining jig for SUS304 pipe [. The development has since then expanded in many research. This research finds the optimum finishing condition for mirror finish standard in internal surface of aluminum A2017 pipe. We use a 100% polyester fabric that does not cause scratch on the material and found that the optimum pole-pipe gap to be 13mm to achieve the best surface roughness Ra of 0.020μm after finishing, from surface roughness Ra of 0.195μm before finishing.
磁力加工夹具磁场辅助内精加工工艺研究
DOI：
--
发表时间：
2005
期刊：
Key Engineering Materials 291-292
影响因子：
--
作者：
Y.Zou;T.Shinmura
通讯作者：
T.Shinmura