Vertical compensation friction stir welding assisted by external stationary shoulder
Vertical compensation friction stir welding assisted by external stationary shoulder
复制标题
外部固定台肩辅助的垂直补偿搅拌摩擦焊
DOI：
10.1016/j.matdes.2014.12.009
复制
发表时间：
2015-03
期刊：
影响因子：
--
通讯作者：
Shuangsheng Gao
中科院分区：
文献类型：
--
作者：
Xiangchen Meng;Lin Ma;Hao Lu;Shuangsheng Gao
Vertical compensation friction stir welding (VCFSW) was developed to solve the existence of a big gap at the interface between two workpieces to be welded. By a self-designed tool system with external stationary shoulder, VCFSW is successfully used to weld 6061-T6 aluminum alloy with the thickness of 4 mm, while 2024-T4 aluminum alloy is chosen as compensation material. When using a traditional tool, it is difficult for VCFSW to attain a sound joint if the width of compensation strip is no less than 1.5 mm. The self-designed stationary shoulder tool system is more suitable for VCFSW. Defect-free VCFSW joints using the self-designed stationary shoulder are attained when the widths of strip vary from 1 mm to 2 mm. For VCFSW process, increasing the rotational velocity and decreasing the welding speed are beneficial to break the compensation strip into pieces to get the higher quality welding joint. When the width of compensation strip is 1 mm, the tensile strength and elongation of joint by the stationary shoulder tool system reach the maximum of 75.1% and 58.8% of base material (BM) when using the welding speed of 50 mm/min and rotational velocity of 2000 rpm, respectively. The fracture surface morphology of VCFSW joint presents the typical ductile fracture.
登录
查看更多内容
DOI：
10.1115/1.4001581
发表时间：
2010-08
影响因子：
4
作者：
E. F. Shultz;E. G. Cole;Christopher B. Smith;M. Zinn;N. Ferrier;F. Pfefferkorn
通讯作者：
E. F. Shultz;E. G. Cole;Christopher B. Smith;M. Zinn;N. Ferrier;F. Pfefferkorn
影响因子：
8.4
作者：
L. Wan;Yongxian Huang;Zongliang Lv;S. Lv;Jicai Feng
通讯作者：
L. Wan;Yongxian Huang;Zongliang Lv;S. Lv;Jicai Feng
DOI：
10.4028/www.scientific.net/amr.15-17.375
发表时间：
2006-02
期刊：
Advanced Materials Research
影响因子：
--
作者：
H. Takahara;Y. Motoyama;M. Tsujikawa;S. Oki;S. Chung;K. Higashi
通讯作者：
H. Takahara;Y. Motoyama;M. Tsujikawa;S. Oki;S. Chung;K. Higashi
影响因子：
10.9
作者：
Liguo Zhang;S. Ji;G. Luan;C. Dong;L. Fu
通讯作者：
Liguo Zhang;S. Ji;G. Luan;C. Dong;L. Fu
DOI：
10.1007/s11661-011-0606-2
发表时间：
2011-01
期刊：
Metallurgical and Materials Transactions A
影响因子：
--
作者：
P. Davies;B. Wynne;W. M. Rainforth;Matthew Thomas;P. Threadgill
通讯作者：
P. Davies;B. Wynne;W. M. Rainforth;Matthew Thomas;P. Threadgill