Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads
Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads
复制标题
DOI：
10.1016/j.ijimpeng.2014.07.018
复制
发表时间：
2015-01-01
影响因子：
5.1
通讯作者：
Johnson, Carol F.
中科院分区：
文献类型：
--
作者：
Thiagarajan, Ganesh;Kadambi, Anirudha V.;Johnson, Carol F.
This paper presents research on the response and behavior of both high strength concrete (107 MPa) and normal strength concrete (27.6 MPa) slabs doubly reinforced with high strength low alloy vanadium (HSLA-V) reinforcement (VR) and conventional steel reinforcing bars (NR) subjected to explosive loads. Four types of reinforced concrete (RC) slabs namely High Strength Concrete (HSC) with HSLA-V Steel Reinforcing bars (HSC-VR), High Strength Concrete with Conventional Steel Reinforcing bars (HSC-NR), Normal Strength Concrete (NSC) with HSLA-V Steel Reinforcing bars (NSC-VR), and Normal Strength Concrete with Conventional Steel Reinforcing bars (NSC-NR) have been studied and compared both experimentally and numerically. The slabs were subjected to blast loads using a shock tube capable of generating both positive and negative phase pressures. Data collected during the dynamic experiments consisted of reflected pressure obtained from several pressure gages arranged along the perimeter of the test article and mid-span deflections captured from an accelerometer, a laser device, and high speed video. The numerical analysis was performed with the commercial program LS-DYNA using two material models. The concrete material models considered were Winfrith Concrete Model (WCM) and Concrete Damage Model Release 3 (CDMR3). Results from the numerical simulation are compared with the experimental values to determine material parameters and other finite element model related constraints. Mesh sensitivity and crack propagation studies were also conducted. From this study it was observed that CDMR3 and WCM can be used over a wider range of concrete compressive strengths. The advantages and disadvantages of using high strength materials are discussed. (C) 2014 Elsevier Ltd. All rights reserved.
