Numerical Simulations of Selected LEAP Centrifuge Experiments with PM4Sand in FLAC
Numerical Simulations of Selected LEAP Centrifuge Experiments with PM4Sand in FLAC
复制标题
在 FLAC 中使用 PM4Sand 进行选定 LEAP 离心机实验的数值模拟
DOI:
10.1007/978-3-030-22818-7_24
复制
发表时间:
2019
期刊:
影响因子:
--
通讯作者:
K. Ziotopoulou
中科院分区:
文献类型:
--
作者:
J. Montgomery;K. Ziotopoulou
Increasing the confidence in estimates of liquefaction-induced deformations from numerical models requires careful validation of both constitutive models and numerical simulation approaches. This validation should be performed with proper consideration of the intended use of the simulation results and the uncertainty inherent in comparing numerical simulations to laboratory or physical models. This paper describes the comparison of a set of calibrated numerical simulations to the results of centrifuge experiments with a submerged, liquefiable slope. These simulations were performed as part of the 2017 LEAP simulation exercise using the constitutive model PM4Sand and the numerical platform FLAC. The simulation results were compared to those from the centrifuge to identify which aspects of the experimental response the simulations were adequately able to capture. This paper provides a description of the simulation approach including the constitutive model and numerical platform. The process of calibrating PM4Sand to the results of laboratory experiments is described. This is followed by a description of the system-level simulations and a comparison of the simulation results with the experimental results. A sensitivity study was performed to examine trends in the simulation response and a discussion of the findings from this study is presented.
DOI:
10.1007/978-3-030-22818-7_3
发表时间:
2019-11
期刊:
Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading
影响因子:
--
作者:
Mohamed El Ghoraiby;Hanna Park;M. Manzari
通讯作者:
Mohamed El Ghoraiby;Hanna Park;M. Manzari