Influence of light irradiation on Vickers hardness of dual-cure cement polymerized under restorations.
Influence of light irradiation on Vickers hardness of dual-cure cement polymerized under restorations.
复制标题
光照射对修复体下聚合的双固化水泥维氏硬度的影响。
DOI：
10.4012/dmj.2012-306
复制
发表时间：
2013
影响因子：
2.5
通讯作者：
Shiro Suzuki
中科院分区：
文献类型：
--
作者：
Daisaku Shiomuki;H. Minami;Takuo Tanaka;Shiro Suzuki
本研究评估，通过测量维氏硬度（Hv），这些因素对聚合度的双固化水泥（Panavia F2.0）放置在修复：光透射性能的固化材料，距离直接照射表面，和经过的时间后，光照射。两种材料用于修复：银钯铜金合金（合金）与氧化锆（ZR）。用双固化粘固剂将修复体粘固在牛牙釉质上。在30分钟，2小时，6小时，1天，1周后，确定性照射，在三个测量点，在牙釉质侧的水泥的Hv值进行了评估：两个点在左，右边缘和一个点在中心。采用Bonferroni校正（α=0.05）的双因素ANOVA分析数据。照射后30 min，合金修复体中心Hv值显著低于边缘。对于合金和ZR合金，每个测量点的Hv值持续显著增加至6 h。
This study evaluated, by measuring Vickers hardness (Hv), the effects of these factors on the degree of polymerization of dual-cure cement (Panavia F2.0) placed under a restoration: light transmission property of restoratives materials, distance from the directly irradiated surface, and elapsed time after light irradiation. Two materials were used for the restoration: silver-palladium-copper-gold alloy (Alloy) versus zirconia (ZR). Restorations were cemented on bovine enamel by dual-cure cement. At 30 min, 2 h, 6 h, 1 day, and 1 week after definitive irradiation, Hv values at the enamel side of cement were evaluated at three measuring points: two points at the left and right margins and one point at the center. Data were analyzed by two-way ANOVA with Bonferroni correction (α=0.05). With the Alloy restoration, Hv value at the center was significantly lower than those at the margins at 30 min after irradiation. For both Alloy and ZR restorations, Hv value at each measuring point continued to increase significantly up to 6 h.
使用两种固化模式，双固化树脂水门汀与涂有一体式粘合剂系统的牙本质树脂的微拉伸粘合强度
DOI：
--
发表时间：
2010
期刊：
Dental Materials Journal 29
影响因子：
--
作者：
Takahashi R;Nikaido T;Tagami J;他2人
通讯作者：
他2人