Effects of annealing on high velocity compaction behavior and mechanical properties of iron-base PM alloy
Effects of annealing on high velocity compaction behavior and mechanical properties of iron-base PM alloy
复制标题
DOI：
10.1016/j.powtec.2015.10.040
复制
发表时间：
2016
影响因子：
5.2
通讯作者：
Hongzhou Zhang;Lin Zhang;G. Dong;Zhiwei Liu;Mingli Qin;X. Qu;Y. Lü
中科院分区：
文献类型：
--
作者：
Hongzhou Zhang;Lin Zhang;G. Dong;Zhiwei Liu;Mingli Qin;X. Qu;Y. Lü
High performance PM iron-base alloy was fabricated with annealed powder by high velocity compaction. The effects of powder annealing on densification behavior, variations of stress waves and the resulting mechanical properties of iron-base alloy were studied. The results show that micro-hardness of the powder decreases from 97 Hv to 81 Hv after annealing at 800 °C, facilitating the improvement of powder plasticity and compressibility. Compared with the compacts prepared from unannealed alloy powder, green density of the compacts made from annealed alloy powder is 0.11–0.25 g/cm3higher at the impact velocity range of 6.2–9.4 m/s. Green density of the compact made from annealed alloy powder is as high as 7.61 g/cm3at 9.4 m/s. The tensile strength, yield strength and hardness of the heat treated specimen reach 1459 MPa, 1185 MPa and 50.2 HRC, respectively.
