Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy
Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy
复制标题
纳米共晶 Fe1.87C0.13 合金的干滑动摩擦学性能
作者：
The tribological properties of the nano-eutectic Fe1.87C0.13alloy are investigated under dry-sliding against AISI52100 steel ball in ambient environment with varying applied load and sliding speed. As comparison, the tribological properties of the same alloy after annealing treatment, which is with coarse-grained microstructure, also are examined at the same testing condition. The worn surfaces of the alloys are analyzed by a scanning electron microscope (SEM). The wear resistance of the nano-eutectic Fe1.87C0.13alloy is about 2–6 times higher than that of the annealed coarse-grained Fe1.87C0.13alloy, and the wear rates increase with increasing applied load and sliding speed. Friction coefficients of the two alloys are almost same. These results demonstrate that the wear resistance of the Fe1.87C0.13alloy is improved by forming nanostructure to obtain enhanced mechanical properties, but the friction coefficient is not significantly affected owing to almost the same friction surface states. The wear mechanism of the two alloys shows slight difference.
登录
查看更多内容
晶粒尺寸对纳米结构 AISI52100 钢耐磨性的影响
影响因子：
6
作者：
通讯作者：
--
影响因子：
5
作者：
通讯作者：
--
影响因子：
5
作者：
M. Shafiei;A. Alpas
通讯作者：
M. Shafiei;A. Alpas
影响因子：
5
作者：
Jun Yang;P. La;Wei-min Liu;Q. Xue
通讯作者：
Jun Yang;P. La;Wei-min Liu;Q. Xue
影响因子：
4.4
作者：
Jun Yang;P. La;Wei-min Liu;Jiqiang Ma;Q. Xue
通讯作者：
Jun Yang;P. La;Wei-min Liu;Jiqiang Ma;Q. Xue