Synthesis, Cu incorporation, and deposition of the apatite-type silicates, (La,Ca)10(SiO4)6-x(PO4)xCuyOz

Synthesis, Cu incorporation, and deposition of the apatite-type silicates, (La,Ca)10(SiO4)6-x(PO4)xCuyOz
复制标题

磷灰石型硅酸盐 (La,Ca)10(SiO4)6-x(PO4)xCuyOz 的合成、Cu 掺入和沉积

DOI:
10.1007/s10853-016-9960-1
复制
发表时间:
2016
影响因子:
4.5
通讯作者:
Masataka Ogasawara
Masataka Ogasawara
中科院分区:
材料科学3区
文献类型:
--
作者:
Sumio Kato;Tomoyuki Endo;Masataka Ogasawara

文献摘要

相似文献

采用浸渍法制备了含铜磷灰石型磷灰石-硅酸盐固溶体LaCa(PO)(SiO)CuO(x=3,5,6)。随着铜含量的增加,磷灰石的晶胞体积增大,当x=3和6时,y=0-0.6,表明铜成功地进入了磷灰石晶格的孔道。对LaCa(PO)(SiO)CuO(x=5)样品的Rietveld分析结果表明,在铜掺杂过程中,La和Ca离子在4f位和6h位的分布均保持不变。X射线光电子能谱和热重分析表明,铜物种在加热到1100℃时发生氧化,在空气中冷却时发生还原。此外,LaCa(PO)(SiO)CuO(x=3)样品在500-1100℃范围内的高温X射线衍射分析表明,铜发生了可逆的掺入/沉积,并伴随着铜的氧化/还原。
Cu-containing, apatite-type phosphate-silicate solid solutions, LaCa (PO)(SiO) CuO (x= 3, 5, and 6), were synthesized by an impregnating method into the channels of apatite-type lattice by heat treatment after Cu loading. The unit cell volume of the apatite increased with increasing amount of Cu, y= 0-0.6 for x= 3 and 6, indicating successful incorporation of Cu into the channels of the apatite lattice. The result of Rietveld analysis of a LaCa (PO)(SiO) CuO (x= 5) sample indicated that the distribution of La and Ca cations in both 4f and 6 h sites were maintained during Cu incorporation. X-ray photoelectron spectroscopy and thermogravimetric analyses revealed that oxidation and reduction of Cu species occurred during heating up to 1100 C and cooling in air, respectively. In addition, high-temperature X-ray diffraction analysis of the LaCa (PO)(SiO) CuO (x= 3) sample in the temperature range from 500 to 1100 C revealed that reversible incorporation/deposition of Cu occurred, accompanied by Cu oxidation/reduction.