Compensation of mounting error in in-situ wear measurement during gear pitting test
Compensation of mounting error in in-situ wear measurement during gear pitting test
复制标题
齿轮点蚀试验中原位磨损测量安装误差的补偿
DOI：
10.1016/j.measurement.2022.110808
复制
发表时间：
2022-01
期刊：
影响因子：
5.6
通讯作者：
Ulf Olofsson
中科院分区：
文献类型：
--
作者：
Jiachun Lin;Hanxiao Li;Peng Wang;Ningzhi Li;Zhaoyao Shi;Ulf Olofsson
轮廓仪可用于监测齿轮点蚀试验过程中齿面形貌的演变。由于仪器与齿轮之间安装关系的变化，齿形测量位置与其理论位置的偏差将引入测量误差。在本研究中，理论分析了使用触觉轮廓仪安装时引入的齿形测量误差，并通过实验验证了其为鱼形。提出了一种基于齿轮基准轴垂直平面投影的安装误差补偿方法。结果表明，该方法能有效补偿鱼形齿廓测量误差，有利于评价点蚀试验中齿轮齿面磨损情况。
A profilometer can be used to monitor the tooth surface topography evolution during gear pitting tests. Due to the mounting relationship variation between the instrument and the gear, the tooth profile’s measurement position deviation from its theoretical location will introduce a measurement error. In this study, the tooth profile measurement error introduced by mounting using a tactile profilometer was theoretically analysed and experimentally confirmed as a fish shape. A mounting error compensation method based on projection onto the perpendicular plane to the gear’s datum axis was proposed. The results show that the fish-shaped tooth profile measurement error can be effectively compensated, benefitting the evaluation of the gear tooth surface wear during gear pitting tests.
登录
查看更多内容
影响因子：
2.4
作者：
G. Koulin;J. Zhang;R. Frazer;S. J. Wilson;B. Shaw
通讯作者：
G. Koulin;J. Zhang;R. Frazer;S. J. Wilson;B. Shaw
影响因子：
5
作者：
Haichuan Chang;P. Borghesani;W. Smith;Zhongxiao Peng
通讯作者：
Haichuan Chang;P. Borghesani;W. Smith;Zhongxiao Peng
DOI：
10.6100/ir607374
发表时间：
2006
期刊：
--
影响因子：
--
作者：
M. Morel
通讯作者：
M. Morel
影响因子：
6.8
作者：
Boyu Zhang;Huaiju Liu;Cai-chao Zhu;Y. Ge
通讯作者：
Boyu Zhang;Huaiju Liu;Cai-chao Zhu;Y. Ge
影响因子：
5
作者：
Sosa, Mario;Bjorklund, Stefan;Olofsson, Ulf
通讯作者：
Olofsson, Ulf