Topometric measurement of the flatness of rolled products -: The system TopPlan
Topometric measurement of the flatness of rolled products -: The system TopPlan
复制标题
DOI：
10.1007/s11015-008-9041-z
复制
发表时间：
2008-03-01
期刊：
影响因子：
0.9
通讯作者：
Gromov, A.
中科院分区：
文献类型：
--
作者：
Boerchers, J.;Gromov, A.
TopPlan系统已成功应用于板材热轧机、热轧带钢机（精轧机和/或卷板机前）、冷轧机和带钢精轧机（镀锌、涂锡、修边）生产线。该系统还可以用于获得独立的测量，以确保生产线外的产品质量。通过将边缘图案投射到正在轧制的产品上，TopPlan——一种用于确定板材、板和带材的平面度的地形测量系统——允许对产品的整个长度和宽度的高度分布进行连续的三维监测。测量数据由CCD摄像机连续记录。系统按照工业标准可靠运行，保证了生产过程中的高度可靠性。
The system TopPlan is successfully being used on plate hot-rolling mills, hot-strip mills (in the finishing line and/or ahead of the coiler), cold-rolling mills, and strip-finishing (galvanizing, tin-coating, trimming) lines. The system can also be used to obtain independent measurements in order to ensure the quality of products outside the production line. By projecting fringe patterns onto the product being rolled, TopPlan - a topometric system for determining the flatness of sheet, plate, and strip - allows continuous three-dimensional monitoring of the height distribution over the entire length and width of the product. The measurement data are continuously recorded by a CCD camera. The reliable operation of the system in accordance with industrial standards guarantees a high degree of reliability in the production process.