Effect of composition on the texture and deformation behaviour of wrought Mg alloys
Effect of composition on the texture and deformation behaviour of wrought Mg alloys
复制标题
DOI：
10.1016/j.scriptamat.2007.09.054
复制
发表时间：
2008-02-01
影响因子：
6
通讯作者：
Barnett, M.
中科院分区：
文献类型：
--
作者：
Stanford, N.;Barnett, M.
研究了三种挤压镁合金：镁-3Al-1锌(AZ31)、镁-1.5Mn(M1)和镁-1Mn-0.4RE(ME10)的显微组织和力学性能。ME10的拉伸屈服强度接近AZ31和M1的一半。M1、AZ31和ME10的拉伸延伸率分别为6%、11%和19%。这一性能范围很大，这归因于ME10独特的挤压织构和M1中高密度的细小颗粒。皇冠版权(C)2007由爱思唯尔有限公司代表Acta Materialia Inc.出版。保留所有权利。
The microstructure and mechanical response of three extruded magnesium alloys, Mg-3Al-1Zn (AZ31), Mg-1.5Mn (M1) and Mg-1Mn-0.4RE (ME10) are examined. The tensile yield strength of ME10 was nearly half that of AZ31 and M1. The tensile elongations were 6%, 11% and 19%, for M1, AZ31 and ME10, respectively. This range of properties is large and is attributed to the unique extrusion texture produced in ME10, and the high density of fine particles in M1. Crown Copyright (c) 2007 Published by Elsevier Ltd. on behalf of Acta Materialia Inc. All rights reserved.