Bunch Shape Measurements at the GSI CW-Linac Prototype
Bunch Shape Measurements at the GSI CW-Linac Prototype
复制标题
GSI CW-Linac 原型上的束形状测量
DOI:
10.18429/jacow-ipac2018-wepak006
复制
发表时间:
2018
期刊:
影响因子:
--
通讯作者:
S. Yaramyshev
中科院分区:
文献类型:
--
作者:
T. Sieber;W. Barth;F. Dziuba;A. Feschenko;P. Forck;S. Gavrilov;V. Gettmann;M. Heilmann;T. Kürzeder;M. Miski;H. Reeg;A. Reiter;S. Yaramyshev
The existing GSI accelerator will become the injector for FAIR [1-5]. To preserve and enhance the current experimental program at UNILAC, a new Linac is under development, which shall run in parallel to the FAIR injector, providing cw-beams of ions at energies from 3.5 – 7.3 MeV/u [6, 7]. For this cw-Linac a superconducting prototype cavity has been developed and was first operated with beam in summer 2017 [8]. The resonator is a cross-bar H-structure (CH) of 0.7 m length, with a resonant frequency of 216.8 MHz. It has been installed behind the GSI High Charge State Injector (HLI), which provided 108 MHz bunches of 1.4 MeV/u Ar6+/9+/11+ ions at a duty cycle of 25%. Due to the frequency jump and small longitudinal acceptance of the CH, proper matching of the HLI beam to the prototype was required. The bunch properties of the injected beam as well as the effect of different phaseand amplitude-settings of the cavity were measured in detail with a bunch shape monitor (BSM) fabricated at INR, Moscow [9], while the mean energy was analyzed by time-of-flight method with phase probes. In this contribution, the bunch shape measurements are described and the capabilities of the used BSM measurement principle are discussed.