Cu10Sn to Ti6Al4V bonding mechanisms in laser-based powder bed fusion multiple material additive manufacturing with different build strategies
Cu10Sn to Ti6Al4V bonding mechanisms in laser-based powder bed fusion multiple material additive manufacturing with different build strategies
复制标题
DOI：
10.1016/j.addma.2021.102588
复制
发表时间：
2022-01
影响因子：
11
通讯作者：
Chao Wei;Lu Liu;Huatang Cao;X. Zhong;Xu Xu-Xu;Yuchen Gu;Dongxu Cheng;Yihe Huang;Zhaoqing Li;W. Guo;Zhu Liu;Lin Li
中科院分区：
文献类型：
--
作者：
Chao Wei;Lu Liu;Huatang Cao;X. Zhong;Xu Xu-Xu;Yuchen Gu;Dongxu Cheng;Yihe Huang;Zhaoqing Li;W. Guo;Zhu Liu;Lin Li
Additive manufacturing of titanium alloy (TiA) – copper alloy (CuA) multiple material components poses many challenges due to the significant differences in their material properties. No previous studies have been found to investigate bonding characteristics of TiA-CuA interface fabricated in the build order of TiA→CuA (i.e. TiA first) via laser powder bed fusion (L-PBF). Here we show the interface characteristics of TiA→CuA under different build strategies. We have found that direct bonding causes CuA to delaminate from TiA due to the thin Ti-Cu reaction zone (< 10 µm). Remelting of the interface zone and a few CuA layers close to the interface zone makes the CuA melt pool at the interface to enter a keyhole mode to achieve more Ti-Cu mixing, leading to sound bonding between the materials. The functionally graded material (FGM) causes Ti-Cu brittle phases with a hardness > 1000 Hv and leads to cracks and the separation of CuA part from preprinted TiA part. The bonding mechanisms involved in the different scenarios are proposed.
