Experimental investigations into groove bottom surface roughness for Zr-based bulk metallic glass by using milling
Experimental investigations into groove bottom surface roughness for Zr-based bulk metallic glass by using milling
复制标题
DOI：
10.1007/s00170-022-10720-3
复制
发表时间：
2023-01
期刊：
影响因子：
--
通讯作者：
Yin Liu;Zhichao Song;Zheng Liang;Xiaoqing Cui;Y. Gong;Xingwei Sun;Zhixu Dong;Heran Yang;
中科院分区：
文献类型：
--
作者：
Yin Liu;Zhichao Song;Zheng Liang;Xiaoqing Cui;Y. Gong;Xingwei Sun;Zhixu Dong;Heran Yang;
为了研究锆基大块非晶合金的铣削加工性能，对锆基大块非晶合金的铣槽底面表面粗糙度进行了对比实验研究。通过不同的加工材料、不同涂层的铣刀、不同几何参数的铣刀、不同的加工条件，对锆基大块金属玻璃的铣槽底面表面粗糙度进行了大量的对比试验。从多个角度(表面粗糙度Sa、Sq、Sz、SSk、SKu)对铣槽底面的表面粗糙度进行了比较、研究和分析。试验结果表明，锆基大块金属玻璃具有良好的铣削加工性能。通过试验中采用的加工条件和方法，可以获得较低的表面粗糙度。本文的研究内容为锆基大块金属玻璃的槽磨加工提供了实验依据。同时，也为锆基大块金属玻璃零件的制备提供了有力的试验依据。
In order to study the milling machinability of Zr-based bulk metallic glass, a comparative experimental study on the surface roughness of the milling groove bottom surface for Zr-based bulk metallic glass was carried out in this paper. Through different processing materials, milling tools with different coatings, milling tools with different geometric parameters, and different processing conditions, a large number of comparative tests were carried out on the surface roughness of the milling groove bottom surface for Zr-based bulk metallic glass. The surface roughness values of the milling groove bottom surface are compared, studied, and analyzed from many angles (surface roughness Sa, Sq, Sz, Ssk, and Sku). The test results show that Zr-based bulk metallic glass has good milling machinability. It can obtain a low surface roughness value through the processing conditions and methods used in the test. The research content of this paper provides experimental basis for groove milling of Zr-based bulk metallic glass. At the same time, it also provides a strong test basis for the manufacture of Zr-based bulk metallic glass parts.