ANALYTICAL EXPRESSIONS FOR THE NMR APPARENT DIFFUSION-COEFFICIENTS IN AN ANISOTROPIC SYSTEM AND A SIMPLIFIED METHOD FOR DETERMINING FIBER ORIENTATION

ANALYTICAL EXPRESSIONS FOR THE NMR APPARENT DIFFUSION-COEFFICIENTS IN AN ANISOTROPIC SYSTEM AND A SIMPLIFIED METHOD FOR DETERMINING FIBER ORIENTATION
复制标题

DOI:
10.1002/mrm.1910340210
复制
发表时间:
1995-08-01
影响因子:
3.3
通讯作者:
MORI, S
MORI, S
中科院分区:
医学3区
文献类型:
--
作者:
HSU, EW;MORI, S

文献摘要

被引文献

相似文献

采用三维随机游走模型研究了各向异性扩散的核磁共振测量。发现表观扩散系数可以用对角矩阵、正交旋转矩阵和表示编码磁场梯度的向量的乘积的标准形式表示。扩散系数可以解释为沿主要扩散轴测量的相应系数的总和,由编码方向相对于主轴的方向余弦的平方加权。分析表明,在圆柱对称系统中,确定各向异性的取向至少需要四次扩散测量。利用一种特殊的脉冲序列,最小化了梯度交叉项和可能的限制扩散效应,表征了鸡胗的扩散各向异性。平行于肌肉纤维的扩散系数大约是横向扩散系数的两到三倍。此外,该方法成功地检测了样品旋转30度时的角度变化。结果表明,所提出的测量光纤取向的方法是有效的,可用于提高扩散各向异性测量的时间效率。
NMR measurements of anisotropic diffusion were studied using a three-dimensional random-walk model. It was found that the apparent diffusion coefficient can be expressed in a canonical form as the product of a diagonal matrix, an orthonormal rotation matrix, and a vector representing the encoding magnetic field gradient. The diffusion coefficient can be interpreted as the sum of the corresponding coefficients measured along the principal diffusion axes, weighted by the squares of the directional cosines of the encoding direction with respect to the principal axes. The analysis revealed that determining the orientation of anisotropy, in a cylindrically symmetric system, requires a minimum of four diffusion measurements. A special pulse sequence which minimized gradient cross-terms and possible restricted diffusion effects was used to characterize diffusion anisotropy in cut chicken gizzards. Diffusion coefficients parallel to the muscle fibers were found to be approximately two to three times larger than those in the transverse direction. Furthermore, the method was successful in detecting the angular change when the sample was rotated by 30 degrees. Results indicate that the proposed approach to measure fiber orientation is valid and may be used to improve the time efficiency of diffusion anisotropy measurements.