Effects of microfabrication defects on the performance of gas bearings with High aspect ratio in microengine
Effects of microfabrication defects on the performance of gas bearings with High aspect ratio in microengine
复制标题
DOI：
10.1016/j.triboint.2011.12.003
复制
发表时间：
2012-04
影响因子：
6.2
通讯作者：
Xiao-Qing Zhang;Xiaoli Wang;Ren Liu
中科院分区：
文献类型：
--
作者：
Xiao-Qing Zhang;Xiaoli Wang;Ren Liu
The Molecular Gas-film Lubrication model is combined with the tapered gas film thickness equation so that both the gas rarefaction effects and the taper effects are introduced simultaneously to study the steady-state performance and the stability charts of micro bearings. The results indicate that gas rarefaction effects lessen the load capacity and stiffness coefficients, decrease the damping coefficients at lower bearing numbers but increase them at higher bearing numbers. Meanwhile, compared with the ideal bearing with the same minimum clearance, the taper effects weaken the load capacity, increase the required stable minimum eccentricity and narrow the stable static load region.
