A Low-Power 2.45 GHz ZigBee Transceiver for Wearable Personal Medical Devices in WPAN

A Low-Power 2.45 GHz ZigBee Transceiver for Wearable Personal Medical Devices in WPAN
复制标题

DOI:
10.1109/icce.2007.341328
复制
发表时间:
2007-04
期刊:
2007 Digest of Technical Papers International Conference on Consumer Electronics
影响因子:
--
通讯作者:
C. Wang;J.-M. Huang;L.-H. Lee;S.-H. Wang;C. Li
C. Wang;J.-M. Huang;L.-H. Lee;S.-H. Wang;C. Li
中科院分区:
其他
文献类型:
--
作者:
C. Wang;J.-M. Huang;L.-H. Lee;S.-H. Wang;C. Li

文献摘要

被引文献

相似文献

本文介绍了一种符合IEEE 802.15.4物理层标准的2.45 GHz频段ZigBee收发器的结构和电路实现。采用0.18 μ m CMOS工艺设计了一个原型系统和芯片,核心面积为0.16 mm2。仿真结果表明,在Eb/N0 = 9 dB时,包错误率小于1%。在8.0 MHz系统时钟下,总功耗仅为271 muW。
This paper presents the architecture as well as the circuit implementation of a ZigBee transceiver using 2.45 GHz band, which is compliant with the physical layer of IEEE 802.15.4 standard. A prototypical system and chip has been designed using 0.18-mum CMOS process with core area of 0.16 mm2. The simulation results shows the packet error rate is less than 1% given Eb/N0 = 9 dB. The total power consumption is merely 271 muW at a 8.0 MHz system clock.