Study on power generation using electro-conductive polymer and its mixture with magnetic fluid
Study on power generation using electro-conductive polymer and its mixture with magnetic fluid
复制标题
DOI：
10.1016/j.jmmm.2007.12.014
复制
发表时间：
2008-04
影响因子：
2.7
通讯作者：
H. Yamaguchi;Xin‐Rong Zhang;S. Higashi;Mingjun Li
中科院分区：
文献类型：
--
作者：
H. Yamaguchi;Xin‐Rong Zhang;S. Higashi;Mingjun Li
介绍了一种新型的利用导电聚合物及其与磁流体混合的发电系统。本文提出了使用无毒导电聚合物及其与磁性液体的混合物，在室温下工作的系统。该系统可作为未来家庭使用的微型分布式能源供应系统。设计并建立了一套实验装置，借助于对发电的理论分析，研究了发电的性能。结果表明，理论计算结果与实测值吻合较好。基于所得结果，电输出随雷诺数、试验通道尺寸、磁场强度和电导率的增大而增大。据了解，为了获得实用的发电，应该优先考虑提高流体流动速度和磁场强度。
A new power generation system using electro-conductive polymer and its mixture with magnetic fluid is introduced. The system using non-poison electro-conductive polymer and its mixture with magnetic fluid and operating at room temperature is proposed in the present paper. The system could be used as a micro-distributed energy supply system for domestic use in the future. An experimental set-up is designed and established to investigate the performance of the power generation with an aid of a theoretical analysis of the power generation. It is found that the theoretical results are in good agreement with the measured data. Based on the obtained results, the electric output increases with Reynolds number, size of the test channel, magnetic strength and electric conductivity. It is understood that in order to obtain a practical power generation, priority should be put on increasing fluid flow velocity and magnetic field strength.