The Influence of Cold Rolling Reduction on r-value and Recrystallization Behavior in Fe–36Ni Alloy
The Influence of Cold Rolling Reduction on r-value and Recrystallization Behavior in Fe–36Ni Alloy
复制标题
冷轧压下量对 Fe-36Ni 合金 r 值和再结晶行为的影响
DOI：
10.2355/isijinternational.38.640
复制
发表时间：
1998
影响因子：
1.8
通讯作者：
A. Chiba
中科院分区：
文献类型：
--
作者：
Taizo Sato;Y. Tashiro;Y. Honda;M. Nishida;A. Chiba
用透射电镜研究了彩色阴极射线管荫罩用Fe-36%Ni因瓦合金的再结晶行为和晶粒长大。r值随着（111）表面强度的增加而增加。在轻冷轧压下量的情况下，退火后再结晶组织的核心取向为（011），并且核心被（011）取向的冷轧基体包围。另一方面，在大冷轧压下量的情况下，退火后再结晶组织的核取向为（011）和（100）。这两个核心被相同的冷轧矩阵的（011）取向与轻冷轧压下量包围。
Recrystallization behavior and grain growth in Fe-36%Ni invar alloy for shadow masks in color cathode ray tubes are studied by using transmission electron microscopy. The r-value increases with increasing (111) surface intensity. In case of light cold-rolling reduction, nuclei orientations of recrystallized structure after annealing are (011) and the nuclei are surrounded by cold rolled matrices of (011) orientation. On the other hand, in case of heavy cold rolling reduction, nuclei orientations of recrystallized structure after annealing are (011) and (100). These two nuclei are surrounded by the same cold rolled matrices of (011) orientation with light cold rolling reduction.