Simultaneous Generation of Independent Wired and Wireless Services Using a Single Modulator in Millimeter-Wave-Band Radio-Over-Fiber Systems

Simultaneous Generation of Independent Wired and Wireless Services Using a Single Modulator in Millimeter-Wave-Band Radio-Over-Fiber Systems
复制标题

DOI:
10.1109/lpt.2007.905196
复制
发表时间:
2007-10
影响因子:
2.6
通讯作者:
Z. Jia;Jianjun Yu;A. Chowdhury;G. Ellinas;G. Chang
Z. Jia;Jianjun Yu;A. Chowdhury;G. Ellinas;G. Chang
中科院分区:
工程技术3区
文献类型:
--
作者:
Z. Jia;Jianjun Yu;A. Chowdhury;G. Ellinas;G. Chang

文献摘要

被引文献

相似文献

我们实验证明了一种新的光纤无线电方案,只使用一个强度调制器就可以同时获得独立的有线和无线信号。40 GHz或60 GHz毫米波(mm波)光载波是通过副载波复用技术产生的,用于承载2.5 Gb/S无线信号,而10 Gb/S有线信号则通过规则的强度调制施加到原始光载波上。具有双业务的信号在20公里单模光纤(SMF-28)上成功传输,功率损失小于1.5分贝。
We experimentally demonstrated a novel radio-over-fiber scheme to simultaneously obtain independent wired and wireless signals by using only a single intensity modulator. The optical 40- or 60-GHz millimeter-wave (mm-wave) carriers are generated by means of subcarrier-multiplexing techniques to carry 2.5-Gb/s wireless signals while 10-Gb/s wired signals are imposed on the original optical carrier via regular intensity modulation. The signals with dual services are successfully transmitted over 20-km single-mode fiber (SMF-28) with less than 1.5-dB power penalty.