"Advanced Test Accelerator (ATA) Pulse Power Technology Development

"Advanced Test Accelerator (ATA) Pulse Power Technology Development
复制标题

DOI:
10.1109/tns.1981.4331903
复制
发表时间:
1981-03
影响因子:
1.8
通讯作者:
L. Reginato;D. Branum;E. Cook;W. Denhoy;C. Fong;D. Kippenhan;E. Moor;M. Newton;W. Pollard;D. Rogers;S. Hibbs;J. Schmidt;M. Smith;W. Weiss;J. White
L. Reginato;D. Branum;E. Cook;W. Denhoy;C. Fong;D. Kippenhan;E. Moor;M. Newton;W. Pollard;D. Rogers;S. Hibbs;J. Schmidt;M. Smith;W. Weiss;J. White
中科院分区:
工程技术3区
文献类型:
--
作者:
L. Reginato;D. Branum;E. Cook;W. Denhoy;C. Fong;D. Kippenhan;E. Moor;M. Newton;W. Pollard;D. Rogers;S. Hibbs;J. Schmidt;M. Smith;W. Weiss;J. White

文献摘要

被引文献

相似文献

高级测试加速器(ATA)是一种脉冲线性感应加速器,具有以下设计参数:50 MeV,10 kA,70 ns和1 kHz的10脉冲群。加速是通过190个铁氧体负载的细胞,每一个能够保持一个250千伏的电压脉冲为70纳秒跨越1英寸的间隙。这台机器的独特之处在于它在非常高的电流下具有1 kHz的突发模式能力。本文介绍了以实验测试加速器(ETA)技术为基础的脉冲电源研制计划。在脉冲功率部件中,在电气和机械方面都进行了相当大的改变,特别考虑了设计以实现更高的可靠性。一个包含所有脉冲功率组件的原型模块已经建成,并进行了数百万次的测试。描述了原型组件和测试结果。
The Advanced Test Accelerator (ATA) is a pulsed linear induction accelerator with the following design parameters: 50 MeV, 10 kA, 70 ns, and 1 kHz in a ten-pulse burst. Acceleration is accomplished by means of 190 ferrite-loaded cells, each capable of maintaining a 250 kV voltage pulse for 70 ns across a 1-inch gap. The unique characteristic of this machine is its 1 kHz burst mode capability at very high currents. This paper describes the pulse power development program which used the Experimental Test Accelerator (ETA) technology as a starting base. Considerable changes have been made both electrically and mechanically in the pulse power components with special consideration being given to the design to achieve higher reliability. A prototype module which incorporates all the pulse power components has been built and tested for millions of shots. Prototype components and test results are described.