Source identification and quantification of chlorinated and brominated polycyclic aromatic hydrocarbons from cement kilns co-processing solid wastes
Source identification and quantification of chlorinated and brominated polycyclic aromatic hydrocarbons from cement kilns co-processing solid wastes
复制标题
DOI：
10.1016/j.envpol.2018.08.025
复制
发表时间：
2018-11-01
影响因子：
8.9
通讯作者：
Liu, Guorui
中科院分区：
文献类型：
--
作者：
Jin, Rong;Yang, Lili;Liu, Guorui
Chlorinated and brominated polycyclic aromatic hydrocarbons (Cl/Br-PAHs) are widespread persistent organic pollutants (POPS) in environments. Identifying the new sources of Cl/Br-PAHs is important for implementing source control and reducing environmental risk. Although co-processing of solid wastes by cement kilns increased recently, the occurrences and characteristics of Cl/Br-PAHs as emerging POPs during cement kiln co-processing solid wastes have not been investigated. This study firstly investigated the occurrences, characteristics, and variations of Cl/Br-PAHs from four cement kilns co-processing different solid wastes. The concentration ranges of Cl-PAHs and Br-PAHs in stack gas samples from the investigated cement kilns were 15.6-94.1 ng m(-3) and 1.04-4.28 ng m(-3), respectively. Emission factors of CI-PAHs and Br-PAHs through stack gases were 29.9-275 mu g t(-1) and 3.0-8.3 mu g t(-1) , respectively. Variations of Cl/Br-PAHs in particle samples collected from different process stages within the cement kiln system indicated that the kiln end was the major formation zone for Cl/Br-PAHs. Congener profiles of Cl/Br-PAHs varied with the co-processed solid waste types, indicating the important influence of raw material compositions. Calculations of net emissions of Cl/Br-PAHs within the cement kiln systems suggested efficient destruction (87.6%-98.8%) of Cl/Br-PAHs by the cement kilns. (C) 2018 Elsevier Ltd. All rights reserved.
