Cofired Magnetoelectric Laminate Composites
Cofired Magnetoelectric Laminate Composites
复制标题
DOI：
10.1111/j.1551-2916.2010.04213.x
复制
发表时间：
2011-04
影响因子：
3.9
通讯作者：
Chee-Sung Park;S. Priya
中科院分区：
文献类型：
--
作者：
Chee-Sung Park;S. Priya
We report the structural, electrical, and magnetoelectric (ME) properties of cofired ME laminate composites synthesized using tape-casting approach. Compositions corresponding to 0.2Pb(Zn1/3Nb2/3)–0.8Pb(Zr0.5Ti0.5)O3 [PZNT] and (Ni0.6Cu0.2Zn0.2) Fe2O3 [NCZF] were used as piezoelectric and magnetostrictive phases, respectively. In order to reduce the sintering temperature of the ferrite layer, NZF was modified with Cu and thereafter the laminate composite was successfully sintered at 930°C. The interface between PZNT and NCZF was found to exhibit strong bonding with no structural defects, which was correlated with cross diffusion of ions. The laminate composite was found to exhibit the ME coefficient of 82 mV·(cm·Oe)−1 at Hdc=67 Oe and was able to detect a small DC magnetic field of 1 μT under Hac=1 Oe at 1 kHz. This sensitivity was attributed to the effectiveness of elastic coupling in the laminate structure. Fabrication of cofired laminate composites with high magnetic field sensitivity will lead to their wide-scale application.
