Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm
Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm
复制标题
1kW级全高温超导感应/同步发电机定子绕组弯曲直径20mm发电特性实验与理论研究
DOI：
10.1109/tasc.2022.3170854
复制
发表时间：
2022
影响因子：
1.8
通讯作者：
Peihong Zhang
中科院分区：
文献类型：
--
作者：
Taketsune Nakamura;Tenghui Dong;Jun Matsuura;T. Kiss;K. Higashikawa;S. Satō;Peihong Zhang
我们报告的实验和理论结果的发电特性的1千瓦级完全高温超导感应/同步发电机（HTS-ISG），包括定子绕组使用REBCO磁带和转子绕组使用BSCCO磁带。REBCO定子绕组的弯曲直径为20 mm，在77 K时的平均临界电流为90 A。作为液氮温度下的实验结果，我们成功地进行了超过500 W的发电试验。从这个结果，我们可以证明一个小型的全超导发电机的可能性。
We report experimental and theoretical results of power generation characteristics of a 1 kW class fully High Temperature Superconducting Induction/Synchronous Generator (HTS-ISG) that consists of a stator winding using REBCO tape and a rotor winding using BSCCO tape. The bending diameter of REBCO stator winding is 20 mm and its average critical current is 90 A at 77 K. As a result of experiments at liquid nitrogen temperature, we succeeded in a power generation test exceeding 500 W. From this result, we could demonstrate the possibility of a small-sized fully superconducting generator.