Experimental investigation of a PCM-HP heat sink on its thermal performance and anti-thermal-shock capacity for high
Experimental investigation of a PCM-HP heat sink on its thermal performance and anti-thermal-shock capacity for high
复制标题
PCM-HP散热器对大功率LED热性能及抗热冲击能力的实验研究
DOI:
10.1016/j.applthermaleng.2016.07.127
复制
发表时间:
2016-09-05
影响因子:
6.4
通讯作者:
Yu, Binhai
中科院分区:
文献类型:
--
作者:
Wu, Yuxuan;Tang, Yong;Yu, Binhai
High-power LEDs demonstrate a number of benefits compared with conventional incandescent lamps and fluorescent lamps, including a longer lifetime, higher brightness and lower power consumption. However, owing to their severe high heat flux, it is difficult to develop effective thermal management of high-power LEDs, especially under cyclic working modes, which cause serious periodic thermal stress and limit further development. Focusing on the above problem, this paper designed a phase-change material (PCM) base heat pipe heat sink (PCM-HP heat sink) that consists of a PCM base, adapter plate, heat pipe and finned radiator. Different parameters, such as three types of interior materials to fill the heat sink, three LED power inputs and eight LED cyclic working modes, were separately studied to investigate the thermal performance and anti-thermal-shock capacity of the PCM-HP heat sink. The results show that the PCM-HP heat sink possesses remarkable thermal performance owing to the reduction of the LED heating rate and peak temperature. More importantly, an excellent anti-thermal-shock capacity of the PCM-HP heat sink is also demonstrated when applied in LED cyclic working modes, and this capacity demonstrates the best range. (C) 2016 Elsevier Ltd. All rights reserved.