Polymer waveguide-coupled 14-Gb/s × 12-channel parallel-optical modules mounted on optical PCB through Sn-Ag-Cu-solder reflow
Polymer waveguide-coupled 14-Gb/s × 12-channel parallel-optical modules mounted on optical PCB through Sn-Ag-Cu-solder reflow
复制标题
通过锡银铜回流焊安装在光学 PCB 上的聚合物波导耦合 14 Gb/s × 12 通道并行光学模块
DOI：
10.1109/icsj.2013.6756090
复制
发表时间：
2013
期刊：
影响因子：
--
通讯作者：
H. Nasu
中科院分区：
文献类型：
--
作者：
Agyl Fajar Rizky;N. Nishimura;Yoshinobu Nekado;T. Uemura;H. Nasu
我们展示了一种新的架构安装平行光模块（POM）到光学印刷电路板（PCB）通过锡-银-铜焊料回流工艺，其中精确定位的螺柱引脚上的光学PCB和引导孔上形成的POMs配对，以保持良好的光耦合。在使用评估板的测试环境中，我们证实了所制作的14 Gb/s × 12通道POM具有良好的传输性能。然后，通过Sn-Ag-Cu-焊料回流工艺将POM实际安装到光学PCB上。我们报告耦合损耗特性和信号质量在14 Gb/s PRBS 231-1的光链路使用POM安装的光学PCB。
We demonstrate a novel architecture of mounting parallel-optical modules (POMs) onto an optical printed circuit board (PCB) through Sn-Ag-Cu-solder reflow process where precisely positioned stud-pins on optical PCB and guide holes formed on POMs were mated to maintain good optical coupling. We confirmed that fabricated 14-Gb/s × 12-channel POMs achieved a good transmission performance on a test environment using evaluation boards. Then, the POM was mounted onto the optical PCB through Sn-Ag-Cu-solder reflow process actually. We report coupling loss characteristics and signal qualities at 14-Gb/s PRBS 231-1 for the optical link using POM-mounted optical PCBs.