Development and application of MCNP auto-modeling tool: Mcam 3.0
Development and application of MCNP auto-modeling tool: Mcam 3.0
复制标题
MCNP自动建模工具Mcam 3.0的开发与应用
DOI：
10.1016/j.fusengdes.2005.06.236
复制
发表时间：
2003
期刊：
影响因子：
--
通讯作者：
L. Tong
中科院分区：
文献类型：
--
作者：
Xiaoping Liu;Yue;L. Tong
Mcam是“MCNP Automatic Modeling”的缩写，是基于CAD技术的MCNP几何模型的CAD接口程序。利用现有的CAD技术是Mcam的主要特点。总体来说，CAD技术的应用主要体现在两个方面：（1）Mcam使MCNP几何模型的创建成为可能，（2）通过继承已有的三维CAD模型，加速MCNP几何模型的创建。介绍了Mcam的主要功能：（1）将CAD模型转换为MCNP几何模型的功能;（2）将MCNP几何模型转换为CAD模型的功能;（3）构造CAD模型的功能。文章最后给出了几个模型来分别说明Mcam的不同能力。
Mcam is abbreviation of “MCNP Automatic Modeling”, which is a CAD interface program of MCNP geometry model based on CAD technology. Making use of existing CAD technology is Mcam's major characteristic. In rough, CAD technology is utilized in the following two ways: (1) Mcam makes it possible to create MCNP geometry model in some CAD software; (2) accelerate creation of MCNP geometry model by inheriting some existing 3D CAD model. The paper gives an introduction of Mcam's major ability: (1) ability to convert CAD model into MCNP geometry model; (2) ability to convert MCNP geometry model into CAD model; (3) ability to construct CAD model. At the end of the paper, several models are given to demonstrate Mcam's different ability respectively.