High coercivity in rapidly quenched Sm(Fe, T)12‐type magnets

High coercivity in rapidly quenched Sm(Fe, T)12‐type magnets
复制标题

快速淬火 Sm(Fe, T)12 型磁体的高矫顽力

DOI:
10.1063/1.101501
复制
发表时间:
1989
影响因子:
4
通讯作者:
G. Hadjipanayis
G. Hadjipanayis
中科院分区:
物理与天体物理2区
文献类型:
--
作者:
E. Singleton;J. Strzeszewski;G. Hadjipanayis

文献摘要

参考文献

被引文献

相似文献

研究了熔纺Sm(FeT)₁₂合金(其中T = Ti、V、Al、Cu、Ga、Si,有些还含有少量的B和C)的磁性和结构特性。样品在淬火态下是软磁性的。在750到1050℃的温度范围内对样品进行加热时,产生了高矫顽力场。退火后,在所有合金中都发现了四方的ThMn₁₂型结构。在Sm₁₀Fe₈₀Ti₇.₅B₂.₅样品上获得了最高的矫顽力,Hc约为7.7 kOe。这些矫顽力比以前获得的要高得多,使得这些合金成为永磁体开发的良好候选材料。
The magnetic and structural properties of melt‐spun Sm(FeT)12 alloys where T=Ti,V,Al,Cu,Ga,Si and with some containing small amounts of B and C have been studied. The samples are magnetically soft in the as‐quenched state. High coercive fields are developed upon heating the samples at temperatures ranging from 750 to 1050 °C. The tetragonal ThMn12‐type structure was found in all the alloys after annealing. The highest coercivities have been obtained on a Sm10Fe80Ti7.5B2.5 sample with Hc ≂7.7 kOe. These coercivities are much higher than those obtained previously and make these alloys good candidates for permanent magnet development.
DOI: 10.1063/1.333572
发表时间: 1984-01-01
影响因子: 3.2
作者:
SAGAWA, M;FUJIMURA, S;MATSUURA, Y
通讯作者: MATSUURA, Y