CuO nanosheet as a recyclable Fenton-like catalyst prepared from simulated Cu(ii) waste effluents by alkaline H2O2 reaction
CuO nanosheet as a recyclable Fenton-like catalyst prepared from simulated Cu(ii) waste effluents by alkaline H2O2 reaction
复制标题
CuO 纳米片作为可回收的类芬顿催化剂,由模拟 Cu(II) 废水通过碱性 H2O2 反应制备
DOI:
10.1039/c8en00930a
复制
发表时间:
2019-01-01
影响因子:
7.3
通讯作者:
Bian, Zhenfeng
中科院分区:
文献类型:
--
作者:
Fang, Mengyuan;Zheng, Ru;Bian, Zhenfeng
The direct discharge of copper containing wastewater into the water body not only causes serious harm to the ecological environment, but also results in copper resource wastage. A green approach was successfully developed to prepare CuO nanosheets (NSs) from simulated Cu(ii) waste effluents by alkaline H2O2 reaction. The FTIR, EXAFS and XPS results revealed that peroxide group exists on the surface of the as-prepared CuO nanosheets, and the formation mechanism of copper peroxide has been proposed. Assisted by visible light irradiation, the CuO NS as a recyclable Fenton-like catalyst achieved complete degradation of phenol within 40 min. Moreover, the copper ions leached during the Fenton-like process were recycled via alkaline H2O2 reaction and their concentration in the solution reduced to below 1 mg L-1, therefore realizing a copper life cycle and Fenton-like degradation of organic pollutants.