Neutrino super beam based on a superconducting proton linac

Neutrino super beam based on a superconducting proton linac
复制标题

基于超导质子直线加速器的中微子超级束

DOI:
10.1103/physrevstab.17.031001
复制
发表时间:
2014
期刊:
Physical Review Special Topics - Accelerators and Beams
影响因子:
--
通讯作者:
Baussan E
Baussan E
中科院分区:
--
文献类型:
--
作者:
Baussan E

文献摘要

参考文献

被引文献

相似文献

我们提出了一个新的中微子超级束的设计研究的超导质子直线加速器在欧洲核子研究中心。该光束的目标是百万吨质量物理学,一个大型水切伦科夫探测器,拟用于法国Modane的Souterrain,基线为130公里。该设施的目的是研究中微子区的破坏。在本文的研究中,我们对中微子束进行了概念设计,特别是对靶和磁聚焦装置进行了设计。事实上,这种束提出了几个前所未有的挑战,涉及高初级质子束功率(4兆瓦),高重复率(50赫兹),和质子的低动能(4.5 GeV)。该设计是通过对系统的所有主要部件的研究完成的,从传输系统开始,引导光束到靶,直到束流收集器。这是第一个完整的研究中微子束的基础上的球床靶能够承受大的热沉积MW级质子束。
We present a new design study of the neutrino Super Beam based on the Superconducting Proton Linac at CERN. This beam is aimed at megaton mass physics, a large water Cherenkov detector, proposed for the Laboratoire Souterrain de Modane in France, with a baseline of 130 km. The aim of this proposed facility is to studyviolation in the neutrino sector. In the study reported here, we have developed the conceptual design of the neutrino beam, especially the target and the magnetic focusing device. Indeed, this beam presents several unprecedented challenges, related to the high primary proton beam power (4 MW), the high repetition rate (50 Hz), and the low kinetic energy of the protons (4.5 GeV). The design is completed by a study of all the main components of the system, starting from the transport system to guide the beam to the target up to the beam dump. This is the first complete study of a neutrino beam based on a pebble-bed target capable of standing the large heat deposition of MW class proton beams.
DOI: --
发表时间: 1988
期刊:
影响因子: --
作者:
R. Thomas;G. R. Stevenson
通讯作者: G. R. Stevenson
特西·迪·劳雷亚
DOI: --
发表时间: 2002
期刊:
影响因子: --
作者:
Mauro Ranchicchio;S. Tucci;Valeria Cardellini;funzionale di WebSim
通讯作者: funzionale di WebSim