Investigation on wear characteristics of a titanium alloy/steel tribo-pair
Investigation on wear characteristics of a titanium alloy/steel tribo-pair
复制标题
DOI：
10.1016/j.matdes.2014.09.016
复制
发表时间：
2015-01-01
影响因子：
8.4
通讯作者：
Wang, S. Q.
中科院分区：
文献类型：
--
作者：
Chen, K. M.;Zhou, Y.;Wang, S. Q.
在25~600℃、50~250N的条件下，对钛合金与52100钢摩擦副进行了干滑动磨损试验，研究了钛合金与对偶钢的磨损特性。结果表明，在不同的试验条件下，钛合金(销)和钢(盘)的磨损表面均存在摩擦层。在25-200℃时，钛合金的磨损率远高于钢。当温度升高到400-600摄氏度时，钛合金和钢的磨损率都大大降低到非常低的值。对于钛合金(Pins)来说，磨损从严重到轻微的转变是由于形成了含有摩擦氧化物的摩擦层，特别是Fe_2O_3。钛合金与52100钢的摩擦副是一种理想的高温滑动系统。(C)2014爱思唯尔有限公司。保留所有权利。
Dry sliding wear tests of a titanium alloy against AISI 52100 steel as a tribo-pair were performed under 50-250 N at 25-600 degrees C. The wear characteristics of the titanium alloy and the counterface steel were investigated. The results showed that tribo-layers always existed on the worn surfaces of titanium alloy (pins) and steel (disks) in various test conditions. At 25-200 degrees C, the titanium alloy presented much higher wear rate than the steel. As the temperature increased to 400-600 degrees C, the wear rate was substantially reduced to very low values for both of the titanium alloy and steel. For titanium alloy (pins), the severe-to-mild wear transition was attributed to the formation of tribo-layers containing tribo-oxides, especially Fe2O3. The tribo-pair of the titanium alloy sliding against AISI 52100 steel was suggested to an ideal sliding system for elevated-temperature applications. (C) 2014 Elsevier Ltd. All rights reserved.