CO2 absorption of CaO coated on aluminosilicate foam
CO2 absorption of CaO coated on aluminosilicate foam
复制标题
DOI：
10.2109/jcersj2.116.176
复制
发表时间：
2008
影响因子：
1.1
通讯作者：
I. Yanase;Y. Yamakawa;Hidehiko Kobayashi
中科院分区：
文献类型：
--
作者：
I. Yanase;Y. Yamakawa;Hidehiko Kobayashi
以聚氨酯泡沫为原料制备了涂覆cao的硅酸铝泡沫cs0.9 al0.9 si2.106，并对其CO2吸收性能进行了研究。将硅酸铝浆料涂覆在聚氨酯泡沫上，在873 K和1523 K条件下分别热处理20 h和5 h，制备硅酸铝泡沫。将CaO浆料包覆在铝硅酸盐泡沫上，在1073 K下保温5 h，将制备的Ca(OH)2柱状晶体分解，在泡沫上形成多孔CaO。涂布的泡沫塑料具有良好的CO2吸收能力和较长的CO2吸解吸循环寿命。在15次二氧化碳吸收和解吸循环中，cao包覆泡沫继续保持约90%的二氧化碳吸收率。
CaO-coated aluminosilicate foam, Cs0.9Al0.9Si2.1O6, was fabricated by utilizing a polyurethane foam, and CO2 absorption behavior of the foam was investigated. Aluminosilicate foam was fabricated by two-step heat treatment at 873 K for 20 h and 1523 K for 5 h following the coating of aluminosilicate slurry on the polyurethane foam. CaO-coated foam was fabricated by the decomposition of Ca(OH)2 pillar crystals prepared by coating CaO slurry on the aluminosilicate foam at 1073 K for 5 h, which resulted in the formation of porous CaO on the foam. The CaO-coated foam showed good CO2 absorption ability and a long lifetime for the cyclic process of CO2 absorption and desorption. The CaO-coated foam continued to maintain a CO2 absorption ratio of approximately 90% for 15 CO2 absorption and desorption cycles.