Difference in recrystallization behavior between lath martensite and deformed ferrite in ultralow carbon steel
Difference in recrystallization behavior between lath martensite and deformed ferrite in ultralow carbon steel
复制标题
DOI：
10.1016/j.scriptamat.2005.04.025
复制
发表时间：
2005-09
影响因子：
6
通讯作者：
Masahide Natori;Y. Futamura;T. Tsuchiyama;S. Takaki
中科院分区：
文献类型：
--
作者：
Masahide Natori;Y. Futamura;T. Tsuchiyama;S. Takaki
对超低碳钢生产的马氏体和变形铁素体材料退火过程中的再结晶行为进行了比较。两种材料具有相同的位错密度；然而，在变形材料中促进了再结晶。这是通过再结晶之前高角度晶界分布的差异来解释的。
A comparison of the recrystallization behavior during the annealing of martensitic and deformed ferritic materials produced in ultralow carbon steel was conducted. Both materials have the same dislocation density; however, recrystallization was promoted in the deformed material. This was explained by the difference in the distribution of high-angle boundaries prior to the recrystallization.